28
assembly
sub assembly
tOP rail subassembly
apply loctite to the four M5x.8x12 socket
caphead mounting bolts.
tOP rail subassembly
Make sure the grease port is at the opposite
end the square opening of the top rail Mount as shown.
tOP rail subassembly
screw all four of the bolts into the rail using
a 4mm allen key.
torque: 125-150 inch/lbs
tOP rail subassembly
place the eccentric Base onto the linear
Block. Make sure to place the shorter tab of the eccentric Base
towards the grease port as shown.
tOP rail subassembly
place the eccentric on the eccentric Base.
Make sure you position the stops as shown.
threaD PreP
Yeti recommends prepping all threads with
loctite or grease. the medium strength (blue) formula along
with proper torque is ideal for keep the bolts snug.
tOP rail subassembly
place the rail system onto the top rail
Mount as shown.
tOP rail subassembly
place the eccentric Clamp onto the
eccentric. apply loctite to the four 6x1x18mm socket caphead
mounting bolts, and tighten them into the eccentric Base using a 5mm
allen key.
torque: 125-150 inch/lbs
main rail subassembly
place the Main pivot Mount onto the rail
as shown. Make sure the threaded mount is positioned away from
the grease port. apply loctite to the two M6x1x8 button caphead bolts and
tighten down using a 4mm allen key.
torque: 125-150 inch/lbs
7
8
1
3
2
4
5
6
