36
main assembly Cont.
assembly
main assembly
place the swingarm spacer - stiff link onto the
pivot pin and lubricate the threads of the pivot pin.
main assembly
loosen the bolts on the stiff link h to release the
bearing and pivot pin. rotate the link into position so the through
holes line up and slide the bearing, washer, and pivot pin in the through
hole. Making sure to keep the bearing flush with the face of the stiff link h.
main assembly
screw the pivot pin in a few turns, and then return
to the upper pivot mount and make a few turns. repeat this back and
forth process until the swingarm is fully secure. repeat this process for the
opposing side.
torque spec: 40-50 inch/pounds.
main assembly
lubricate the through holes on the swingarm.
35
36
33
34
main assembly
push the solid ti bolt out of the rail mount and
frame. place the shock subassembly into position as shown and slide
the solid ti bolt back into position through the frame, rail mount, and shock.
main assembly
screw a M6x1x12 ti Male Bolt and 6.5mmiD x
12.5mmoD, into the bolt and tighten using two 5mm allen keys.
torque spec: 125-150 inch/pounds.
main assembly
slide the swingarm insert - stiff link through the
swingarm bore.
main assembly
tighten the pivot pin together using the 6mm and
8mm allen keys.
torque spec: 40-50 inch/pounds.
39
40
37
38
