26
assembly
assembly
tOOls neeDeD
Warning:
Service on Yeti bicycles requires special
knowledge and tools. Yeti Cycles recommends that all
service and repairs be performed by an authorized Yeti
Dealer
Dead blow hammer
14mm socket
two - 5mm allen keys
6mm allen key
4mm allen key
3mm allen key
8mm allen key
White lithium Grease
Blue loctite
ti prep
time
30-45 minutes depending
on condition of the bike
yeti tiPs
Make sure your tools are in good condition. a
worn allen key can round the hex on a bolt not
allowing for proper torque.
torque settings are listed throughout the
instructions. it is also import to prep all bolt
threads . the instruction denote wether to use a
blue loctite compound or grease.
the linkage tool is necessary to properly
disassemble and reassemble the linkage. Using
a hammer to tap out the pin can cause damage
to the linkage and shock.
not every too may be needed for the assembly/
disassembly of your bike. the list encompasses
all the tools necessary to complete assembly/
disassembly on each bike
