10.7 Compatibility
10.7.1 Configuration files
VIP
con
configuration files of the previous version are basically compatible to the current version.
But always check the settings of functions or values, that were not available in the previous version.
In doubt you should create a new configuration based on the default values after VIP
con
start-up.
10.7.2 Preset files
Preset files of version 3.0 have to be converted to the current version. You can perform this when
updating your VIP
digital
, but also at a later date. Existing presets are not “lost”.
After an update, we recommend to check the settings of the AGC Audio Processing module in those
presets where it is activated. Although the values are being converted, you should consider
differences in sound. In addition, by optimizing the settings you will benefit from the improved
functionality.
Preset files are not compatible to former versions.
10.8 Checking version numbers
We recommend to check version numbers after an update or as a part of troubleshooting. Be aware
that values are only refreshed during the start-up of a program. To make sure to get the appropriate
information about the current firmware of your VIP
digital
after a firmware update, exit the applications
and start them again.
VIP
con
Select
ABOUT
from the menu
HELP
, refer to
Menu: Help
VIP
remote
Click on the
INFO
button (upper right-hand area of the program window), refer to
Info window
VIP
digital
Manual 4.0 Yellowtec 2004 Rev. 26.07.2004
Page 66
