Yeastar Technology MyPBX U520, Installation Manual

Page: 98 / 206

MyPBX U5XX Administrator's Guide
www.yeastar.com Page81
complete as soon as it can be determined that no other matches are possible.
Example 1:
NXXXXXX will match any 7 digits phone number.
Example 2: 1NXXNXXXXX will match a phone number starting with a 1,
followed by a 3-digit area code, and then 6 digit number.
· Strip digits from front
Allows the user to specify the number of digits that will be stripped from the
front of the phone number before the call is placed. For example, if users must
press 0 before dialing a phone number, one digit should be stripped from the
dial string before the call is placed.
·
Prepend these digits before dialing
These digits will be prepended to the phone number before the call is placed. For
example, if a trunk requires 10 digit dialing, but users are more comfortable
with 7 digit dialing, this field could be used to prepend a 3 digit area code to all
7 digit phone numbers before calls are placed.
· Password
The route password can be used to protect this route from being accessed
without a password.
· T.38 Support:
Enable T38 fax in this outbound route (Only for SIP Trunk).
· Rrmemory Hunt
Round robin with memory, remembers which trunk was used last time, and then
use the next available trunk to call out.
· Office Hours
When a specific office hour is selected, this outbound route can only be used
during this office hour, and can‟t be used in non-office hours.
· Member Extensions
Defines the extensions that will be permitted to use this outbound route.
· Member Trunks
Defines the trunks that can be used for this outbound route.