Yeastar Technology MyPBX U520 Installation Manual Download Page 92

Page: 92 / 206

MyPBX U5XX Administrator's Guide

www.yeastar.com

Page75

This will be the transport method used by the SIP Trunk. This method is given by
the SIP trunk provider. The options are UDP (default) or TCP or TLS.

Enable SRTP

Define if SRTP is enabled for this trunk

Qualify

Send check alive packets to the sip provider.

DTMF mode

Set default mode for sending DTMF of this trunk.Default setting: rfc2833

DOD

DOD (Direct Outward Dialing) means the caller ID displayed when dialing out,
before configure this, please make sure the provider supports this feature

Associated Extension

The extension make call out via SIP Trunk will display the associated DOD

2)

Add IAX trunk

Input correct IAX information (provided by VOIP provider). Inaccurate
information will prevent the trunk from registering.

Figure 6-31 Add an IAX Trunk

Summary of Contents for MyPBX U520















































































































































































































Search results

Summary of Contents for MyPBX U520

Reviews:

Brands by name

Popular brands

Yeastar Technology MyPBX U520, Installation Manual

Search results

Summary of Contents for MyPBX U520

Reviews:

Brands by name

Popular brands