Yeastar Technology MyPBX U520, Installation Manual

Page: 69 / 206

MyPBX U5XX Administrator's Guide
www.yeastar.com Page52
· spy modes
There are 4 spy modes available for choice:
General spy: you have the permission to use the following 3 modes.
Normal spy: you can only hear the call, but can't talk
Whisper spy: you can hear the call, and can talk with the monitored extension
Barge spy: you can hear the call and talk with them both
Note : for example,if 500 want to monitor extension 501, we need to enable the
'allow being spied ' for 501, and choose the spy mode for extension 500.
Then pick up 500 and dial “feature codes + 501” to start monitoring when 501
is in a call
If 500 choose „normal spy‟, it should dial‟*90501‟ to start monitoring;
If 500 choose „whisper spy‟, it should dial „*91501‟ to start monitoring;
If 500 choose „barge spy‟, it should dial „*92501‟ to start monitor;
If 500 choose „general spy‟, it can dial „*90501‟,‟*91501‟ or „*92501‟ to start
monitor.
6.1.2 Phone Provisioning
The Auto Provision sub menu provides users a method to Auto Provision IP
Phone after the Express Setup process.
Note : Auto Provision functions fully test with these models:
Yealink (T12, T18, T20, T22, T26, T28, T32, T38, VP530, VP-2009)
Snom (300, 320, 360, 370)
Snom (300, 320, 360, 370)
Polycom (IP 6000, IP 7000, IP 32X, IP33X, IP430, IP450, IP550, IP560,
VVX1500)
Cisco (IP7940, IP7960)
Aastra (9480i, 9480i-CT, 6730i, 6731i, 6753i, 6755i, 6757i, 6757i CT, 6737i)
GrandStream (GXP1450, GXP2100, GXP2110, GXP2120)
Escene (ES220, ES320, ES330, ES410, ES620)
Fanvil (C56, C58, C60, C62)
News:
When provisioning Yealink, Grandstream, Fanvil, Snom IP phone,
MyPBX is not needed to be set as the only DHCP server any more.