Yealink Yealink SIP-T21P User Manual Download Page 89

Page: 89 / 144

Basic Call Features

of time.

You can enable/disable call forward for the phone system, or you can customize call
forward for each or all accounts. Two call forward modes:



Phone (default): Call forward is effective for the phone system.



Custom: Call forward can be configured for each or all accounts.

To configure the call forward mode via web user interface:

Click on Features->Forward & DND.

In the Forward block, mark the desired radio box in the Mode field.

Click Confirm to accept the change.

Note

To enable call forward in phone mode:

Press Menu->Features->Call Forward.

Press or to select the desired forwarding type, and then press the Enter
soft key.

Call forward mode is configurable via web user interface only.

Summary of Contents for Yealink SIP-T21P

















































































































































Search results

Summary of Contents for Yealink SIP-T21P

Reviews:

Related manuals for Yealink SIP-T21P

Brands by name

Popular brands

Yealink Yealink SIP-T21P, User Manual

Search results

Summary of Contents for Yealink SIP-T21P

Reviews:

Related manuals for Yealink SIP-T21P

Brands by name

Popular brands