| Device Network |
13
Description
It configures the primary IPv4 DNS server.
Note
: It works only if “static.network.ip_address_mode” is set to 0 (IPv4)
or 2 (IPv4 & IPv6). In DHCP environment, you also need to make sure
“static.network.static_dns_enable" is set to 1 (On).
Permitted Values
IPv4 Address
Default
Blank
Web UI
Network
>
Basic
>
IPv4 Config
>
Configuration Type(Static IP)
>
Primary DNS
Or
Network
>
Basic
>
IPv4 Config
>
Configuration Type(DHCP)
>
Static
DNS(Enable)
>
Primary DNS
Phone UI
>
Settings
>
Device Settings
>
Network (default password: admin)
>
WAN
Port
>
IPv4 Type(Static IP)
>
Pri.DNS
Or >
Settings
>
Device Settings
>
Network (default password: admin)
>
WAN
Port
>
IPv4 Type(DHCP)
>
IPv4 Static DNS(Enable)
>
Pri.DNS
Parameter
static.network.secondary_dns
[1]
<MAC>.cfg
Description
It configures the secondary IPv4 DNS server.
Note
: It works only if “static.network.ip_address_mode” is set to 0 (IPv4)
or 2 (IPv4 & IPv6). In DHCP environment, you also need to make sure
“static.network.static_dns_enable" is set to 1 (On).
Permitted Values
IPv4 Address
Default
Blank
Web UI
Network
>
Basic
>
IPv4 Config
>
Configuration Type(Static IP)
>
Secondary DNS
Or
Network
>
Basic
>
IPv4 Config
>
Configuration Type(DHCP)
>
Static
DNS(Enable)
>
Secondary DNS
Phone UI
>
Settings
>
Device Settings
>
Network (default password: admin)
>
WAN
Port
>
IPv4 Type(Static IP)
>
Sec.DNS
Or >
Settings
>
Device Settings
>
Network (default password: admin)
>
WAN
Port
>
IPv4 Type(DHCP)
>
IPv4 Static DNS(Enable)
>
Sec.DNS
[1]
If you change this parameter, the device will reboot to make the change take effect.
IPv6 Configuration
If you configure the network settings on the device for an IPv6 network, you can set up an IP address for
the device by using SLAAC (ICMPv6), DHCPv6, or by manually entering an IP address. Ensure that your
network environment supports IPv6. Contact your ISP for more information.
When you enable both SLAAC and DHCPv6 on the device, the server can specify the device to obtain the
IPv6 address and other network settings either from SLAAC or from DHCPv6, if the SLAAC server is not
working, the device will try to obtain the IPv6 address and other network settings via DHCPv6.
Summary of Contents for T58A Teams
Page 1: ......
