Yealink SIP-T2XP Administration Manual Download

Page: 16 / 246

Administrator’s Guide for SIP-T2xP IP Phones



VoIP gateways are configured for SIP.



The latest (or compatible) firmware of the SIP-T2xP IP phones is available.



A call server is active and configured to receive and send SIP messages.

This section lists the available physical features of the SIP-T2xP IP phones.

SIP-T28P

Physical Features:

TI TITAN chipset and TI voice engine

320x160 graphic LCD with 4-level grayscales

6 VoIP accounts, Broadsoft/Avaya/Asterisk validated

HD Voice: HD Codec, HD Handset, HD Speaker

48 keys including 16 programmable keys

1xRJ9 (4P4C) handset port

1xRJ9 (4P4C) headset port

2xRJ45 10/100M Ethernet ports

1XRJ12 (6P6C) expansion module port

19 LEDs: 1xpower, 6xline, 1xmessage, 1xheadset, 10xmemory

Power adapter: AC 100~240V input and DC 5V/1.2A output

Power over Ethernet (IEEE 802.3af)

Multi-language display

Summary of Contents for SIP-T2XP























































































































































































































































Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands

Yealink SIP-T2XP, Administration Manual

Search results

Summary of Contents for SIP-T2XP

Reviews:

Related manuals for SIP-T2XP

Brands by name

Popular brands