User Guide for the SIP-T27G IP Phone
24
To configure a static IPv6 address via phone user interface:
1.
Press
Menu
->
Settings
->
Advanced Settings
(default password: admin)
->
Network
->
WAN Port
.
2.
Press or to select
IPv6
and then press the
Enter
soft key.
3.
Press or to select
Static IPv6 Client
and then press the
Enter
soft key.
4.
Enter the desired value in the
IP Address
,
IPv6 IP Prefix
,
Default Gateway
,
Pri.DNS
and
Sec.DNS
field respectively.
5.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
Note
Wireless Network Settings
Wi-Fi is a popular wireless networking technology that uses radio waves to provide wireless
high-speed Internet and network connections. You can activate/deactivate the Wi-Fi mode on
the IP phone, and then connect your phone to the desired wireless network.
Note
The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.
Ensure that the Wi-Fi USB Dongle WF40 is properly connected to the USB port at the back of the
IP phone. For more information, refer to
