User Guide for the SIP-T27G IP Phone
44
Function Keys:
The function keys are locked. You cannot use the MESSAGE, RD,
HOLD, MUTE, TRAN, CONF, OK, X, navigation keys, soft keys and line
keys until unlocked.
All Keys:
All keys are locked except the Volume key, digit keys, # key, * key,
HEADSET key and Speakerphone key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the X key or
the
Reject
soft key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key, the
Answer
soft
key or the OK key, and end the call by hanging up the handset,
pressing the Speakerphone key, the
End Call
soft key or X key.
Note
To activate the phone lock via phone user interface:
1.
Press
Menu
->
Settings
->
Basic Settings
->
Phone Lock
.
2.
Enter the desired PIN (default PIN: 123) in the
Unlock PIN
field, and then press the
OK
soft
key.
3.
Press or , or the
Switch
soft key to select
Enabled
from the
Lock
Enable
field.
4.
Press or , or the
Switch
soft key to select the desired type from the
Lock Type
field.
5.
(Optional.) Enter the desired interval of automatic phone lock in the
Auto
Lock
field.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press to lock it immediately when the phone is idle.
If it is set to other values except 0 (e.g., 5), the phone will be locked when the phone is
inactive in idle screen for the designated time (in seconds).
6.
Press the
Save
soft key to accept the change.
The emergency number setting, if desired, must be set before lock activation. For more
information, refer to
on page
