User Guide for the SIP-T27G IP Phone
202
When receiving a new voice mail, the phone will play a warning tone. The power indicator LED
will slowly flash red, and the LCD screen will prompt “n New Voice Mail(s)” (“n” indicates the
number of unread voice messages, e.g., 27 New Voice Mail(s)) and a flashing icon .
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
To configure voice mail access codes via phone user interface:
1.
Press
Menu
->
Message
->
Voice Mail
->
Set Voice Mail Code
.
2.
Press the navigation keys to highlight the account which you want to set.
3.
Press the
123
soft key to select the proper input mode and then enter the voice mail access
code (e.g., *97).
4.
Press the
Save
soft key to accept the change or the
Back
soft key to cancel.
Note
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
