Yealink SIP-T19 User Manual Download

Page: 22 / 126

User Guide for the SIP-T19P/SIP-T19 IP Phone

3) Connect the network and power

You have two options for power and network connections. Your system administrator will
advise you which one to use.



AC power



Power over Ethernet (PoE)

Note

AC Power

To connect the AC power:

Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.

Connect the included or a standard Ethernet cable between the Internet port on the
phone and the one on the wall or switch/hub device port.

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T19P IP phone can be powered
from a PoE-compliant switch or hub.

PoE is not applicable to the SIP-T19 IP phone.

PoE is not applicable to the SIP-T19 IP phone. A power adapter should be purchased

separately to power it on.

Summary of Contents for SIP-T19































































































































Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands

Yealink SIP-T19, User Manual

Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands