Yealink SIP-T19 User Manual Download

Page: 25 / 126

Getting Started

The phone status is displayed on the first page of the web user interface.

If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses.

To configure the IP address mode via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port.

Press or to select IPv4, IPv6 or IPv4 & IPv6 from the IP Mode field.

Press the Save soft key to accept the change or the Back soft key to cancel.

To configure a static IPv4 address via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Network->WAN
Port.

Press to select IPv4 and press the Enter soft key.

Summary of Contents for SIP-T19































































































































Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands

Yealink SIP-T19, User Manual

Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands