Yealink SIP-T19 User Manual Download Page 42

Page: 42 / 126

User Guide for the SIP-T19P/SIP-T19 IP Phone

The IP phone enters the local directory directly as there is only Local Directory in the

directory

by default.

If Local Directory is removed from the

directory

, press Menu->

Dir

->Local Directory

to enter the local directory.

Select the desired group.

Press the Option soft key, and then select Detail from the prompt list.

Press or to scroll through the group information and then edit.

Press the Save soft key to accept change or the Back soft key to cancel.

To delete a group from the local directory:

Press the Dir soft key.

The IP phone enters the local directory directly as there is only Local Directory in the

directory

by default.

If Local Directory is removed from the

directory

, press Menu->Dir->Local Directory

to enter the local directory.

Select the desired group.

Summary of Contents for SIP-T19































































































































Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands

Yealink SIP-T19, User Manual

Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands