Yealink SIP-T19 User Manual Download

Page: 76 / 126

User Guide for the SIP-T19P/SIP-T19 IP Phone

To view placed calls list when the phone is in the pre-dialing screen:

Pick up the handset or press the speakerphone.

The LCD screen displays the placed calls list. You can press or to select
the desired entry and then place a call to the contact.

You can use auto answer to automatically answer an incoming call.

To configure auto answer via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Account.

Press the Enter soft key.

Press or , or the Switch soft key to select Enable from the Auto Answer
field.

Press the Save soft key to accept the change or the Back soft key to cancel.

The icon appears on the LCD screen.

Auto answer is configurable via web user interface at the path Account->Basic.

Note

Auto answer is only applicable when there is no other call in progress on the phone.

Summary of Contents for SIP-T19































































































































Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands

Yealink SIP-T19, User Manual

Search results

Summary of Contents for SIP-T19

Reviews:

Related manuals for SIP-T19

Brands by name

Popular brands