Basic Call Features
63
To place a call using the headset:
1.
With the optional headset connected, press to activate the headset mode.
2.
Enter the desired number using the keypad.
3.
Press , , or the Send soft key.
Note
To place multiple calls:
You can have more than one call on your SIP-T19P/SIP-T19 IP phone. To place a new call
during an active call:
1.
Press the Hold soft key to place the original call on hold.
2.
Press the NewCall soft key.
3.
Enter the desired number using the keypad.
4.
Press , , or the Send soft key.
You can press or to switch between the calls, and then press the Resume soft
key to retrieve the desired call.
When you are not in another call, you can answer a call in three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1.
Pick up the handset.
To permanently enable your headset, refer to
Headset Prior
on page
47
.
You can ignore incoming calls by pressing the Reject soft key or the Silence soft key. You
can also activate Do Not Disturb mode to ignore all incoming calls without ring on your
phone. For more information, refer to
Do Not Disturb (DND)
on page
71
.
You can forward incoming calls to someone else by pressing the Fwd soft key. For more
information, refer to
Call Forward
on page
72
.
