The F-address is to be configured by the F-address switch at the safety module and addi-
tionally in the master system e.g. hardware configurator. The F-address is to be set by
the F-address switch besides on the safety module. Only if the F-address set in the hard-
ware configurator accords to the setting of the F-address switch, it is possible to operate!
Pos.
Value
Example
State
Address
0
1
1
1+2+32+512=547
Address: 547
1
2
1
2
4
0
3
8
0
4
16
0
5
32
1
6
64
0
7
128
0
8
256
0
9
512
1
10
1024
0
11
2048
0
When the module is installed, the F-address switch may not be
accessed!
To set the F-address on the safety module the (electronic) module is to
be demounted before as described at “Demounting and module
exchange”.
Chap. 3.5 ‘Demounting and module exchange’ page 80
Address switch for F-
address
VIPA System SLIO
Product description
SDO 4xDC 24V 0.5A - Operating and display elements
HB300 | SM-S | 02x-1SD10 | en | 20-02
48
