VAN-V19001E [V1000→GA500]
14
/35
3-3. Communication Circuit Terminals
Table 8: Communication circuit terminals
Communication
circuit terminal
Name
Signal Level
V1000 GA500
V1000
GA500
R+
D+
V1000: Communication input (+)
GA500: Communication input/output (+)
MEMOBUS/Modbus
communications
Use an RS-485/422 cable
to connect the drive
115.2 kbps (maximum)
For MEMOBUS/Modbus
(RTU mode)
communications
Use an
RS-485
cable to
connect the drive
115.2 kbps (maximum)
S+
V1000: Communication input (+)
GA500: Communication input/output (+)
R-
D-
V1000: Communication input (-)
GA500: Communication input/output (-)
S-
V1000: Communication input (-)
GA500: Communication input/output (-)
IG
AC
Shield ground
0 V
0 V
Note:
You can apply the V1000 communication option board to the GA500, provided that you must purchase and assemble the
communication option board cover (option). The assembling procedure is described in the instruction manual that comes with
the option board cover.
Set DIP switch S2 to ON to enable the termination resistor in the last drive in a MEMOBUS/Modbus network.
