18 Ethernet Connector Details
YASKAWA America, Inc. MP3200iec Hardware Manual YAI-SIA-IEC-5
41
The following are examples of Ethernet network connections via 100Base-Tx cable:
Note:
Recommended ferrite core.
CAUTION
High frequency wave noise from other devices in the installation environment may cause errors in
communications using Ethernet or MECHATROLINK-III connections. When designing a system, use protective
measures to avoid the influence of high frequency wave noise as follows:
1.
Wiring
Wire Ethernet or MECHATROLINK-III cables so that they are well-separated from other cable systems such as the main circuit or
power lines.
2.
Communication system (Ethernet)
•
Communicate data to a remote device through TCP/IP communication.
•
If necessary, increase the number of communication retries.
•
Yaskawa strongly recommends shielded Ethernet cables.
3.
Attach a ferrite core.
Ethernet: Attach it to the communication port side and the external equipment side of the MP3200iec unit.
Model
Manufacturer
E04SR301334
Seiwa Electric Mfg. Co., Ltd
Hub
or Switch
MotionWorks IEC
MP3200iec
YASKAWA SERVOPACK
200V
SGDS-01A12A
SW1
CHARGE
C
N
3
A/B
C
N
1
C
N
2
C
N
4
L1
L2
L2C
L1C
B1/
B2
U
V
W
C
N
6
SERVOPACK
Core
Core
Core
100Base-T
(straight cable)
Servomotor
Other station
