HW0482309
16
1
Configuration and Specification
Table. 1 Rated Specifications
Model
MOTOWELD-E500
III
Type
YWE
−
E500-6N3
Rated Input Voltage and
Number of Phases
480V
±
10% , three-phase
Rated Frequency
50 / 60Hz
27.5kVA
Rated Input
24.3kW
Rated Output Current
500A
Rated Output Voltage
42V
Welding Current
Adjustment Range
30 to 500A (depends on the wire diameter)
Welding Voltage
Adjustment Range
12 to 45V (depends on the wire diameter)
Rated Operational Ratio
80%(for 10 minutes)
Wire Feeding Speed
1.5 to 18 m/min
Wire Feed Motor
-
Servomotor: Print servomoter (standard)
(common for two-axis drive and four-axis drive)
-
Applicable to the minertia servomotor for servo torch
Encoder cable
5 m (standard), 7 m max.
Range of Analog Input
Voltage
0 to 14V (Indication of voltage, current, or wire feeding speed that are
set to the panel)
Welding Type
CO
2
short-circuit welding, MAG/MIG short-circuit welding, pulse welding
Welding Object Material
Iron, stainless steel (Refer to the “Type” on the panel for details.)
Welding Voltage Setting
Synergic or independent
Can be switched by D1 parameter 13
User File
The number of files: 3
“Panel” or “robot” can be switched by D1 parameter 11.
Adjustment of Voltage
and Current Waveform
Control
Can be changed by P parameter in the user file.
Error Output
Output with the arc failure signal on the robot side. (Error contents are
indicated on the panel.)
Arc Touch Start Function
This function can be used by D2 parameter 2, 3, and 4.
Gas Running-in Time
Approximately 20 seconds (can be switched by panel operation)
Gas Pre-flow Time
Approximately 0.06 seconds
(can be switched by panel operation: 65 seconds max.)
Gas After-flow Time
Approximately 0.5 seconds
(can be switched by panel operation: 65 seconds max.)
Wire-stick Prevention
Time
Approximately 0.2 seconds
(Adjustable range by panel operation: 0.02 to 0.4 seconds)
Wire Feeding Slow-down
Speed
Approximately 3m/min for CO
2
short-circuit welding
(Adjustable range by panel operation: 1.5 to 6 m/min)
Approximately 2 m/min for MAG/MIG short-circuit welding and pulse
welding(Adjustable range by panel operation: 1 to 4 m/min)
