YASKAWA MOTOWELD-E500-6N3, Instruction Manual

Page: 14 / 115

HW0482309 14
6.3 Precautions on Welding Operation ・・・・・・・・・ 51
７．
Built-in Functions ・・・・・・・・・・・・・・・・・・ 53
7.1 Terminals for ARCON Signal Input
for Maintenance Check ・・・・・・・・・・・・・・
53
7.2 Internal Selecting Switch ・・・・・・・・・・・・・ 53
7.3 Location of Printed Boards ・・・・・・・・・・・・ 55
7.4 How to Use the Selecting Switch ・・・・・・・・・ 56
8. Maintenance and Inspections ・・・・・・・・・・・・・ 57
9. Fault Analyses
・・・・・・・・・・・・・・・・・・・
59
9.1 Confirming Setting conditions ・・・・・・・・・・・ 59
9.2 Cause and Remedy of Welding Section Faults ・・・・ 61
9.3 Cause and Remedy of Electrical Circuit Section Faults ・・ 64
10. Robot Interface Signals
・・・・・・・・・・・・・・・
66
10.1 Specifications of Robot Interface Signals ・・・・・・ 66
10.2 Meaning and Function of Pr(RC2) Terminal ・・・・・ 68
10.3 Meaning and Function of Signal
for Starting Point Detecting Funcion ・・・・・・・・
70
11. Connection System Diagram
・・・・・・・・・・・・・・・・
71
12. Diagnosis Function ・・・・・・・・・・・・・・・ 72
12.1 Starting up the Welder in the Diagnosis Mode ・・・・ 72
12.2 Confirmation of the DIP Switch Set Status ・・・・・ 74
12.3 Confirmation of the Software Version
・・・・・・・・
75
12.4 Confirmation of Welder Error Occurrence Status ・・・ 76
12.5 Confirming the Number of Welder Error ・・・・・・・ 78
12.6 Clear of Error Record ・・・・・・・・・・・・・・・ 79
12.7 End of Diagnosis Mode ・・・・・・・・・・・・・・
79
13. Adjustment of Welding Characteristics
Using Process Parameters ・・・・・・・・・・・・・・
80
13.1 Adjustable Welding Characteristics ・・・・・・・・・ 80
13.2 Adjustment of Starting Characteristics ・・・・・・・ 81
13.2.1 Adjustment of Starting Pulse
・・・・・・・・・・
81
13.2.2 Adjustment ofHot Conditions ・・・・・・・・・・ 82
13.3 Adjustment of Ending Characteristics ・・・・・・・・ 83
13.4 Adjustment of Short-circuit Welding Characteristics ・ 85
13.5 Adjustment of Pulse Welding ・・・・・・・・・・・
86
13.5.1 Adjustment of MAG Pulse Welding ・・・・・・・ 86
13.5.2 Adjustment of MIG Pulse Welding ・・・・・・・ 87
13.6 Adjustment Of Other Characteristics ・・・・・・・・・・・・・・ 88
13.7 Adjustment of Current Output Characteristics ・・・・・
89