9 Maintenance and Inspection
9.3 Notes on Grease Replenishment/Exchange Procedures
9-15
157569-1CD
HW0485652
MPL100
4. The grease exchange is completed when new grease appears in the
grease exhaust port. (The new grease can be distinguished from the
old grease by color.)
5. Move the L-axis for a few minutes to discharge excess grease.
6. Wipe the discharged grease with a cloth, and reinstall the plug. Before
installing the plug, apply Three Bond 1206C on the thread part of the
plug. Then tighten the plug with a tightening torque of 24.5 N•m
(2.5 kgf•m).
7. Remove the grease zerk from the grease inlet, and reinstall the plug.
Before installing the plug, apply Three Bond 1206C on the thread part
of the plug. Then tighten the plug with a tightening torque of 4.9 N•m
(0.5 kgf•m).
NOTE
If the plug is installed while grease is being exhausted,
grease will leak inside the motor and may cause a damage.
Make sure to install the plug when the grease exhaust is
completed.
80 of 106