YASKAWA FSDrive-MV1000 Series, Parameter Manual

Page: 23 / 241

1.2 Parameter Groups
YASKAWA ELECTRIC TOEP C710687 03B FSDrive-MV1000 Parameter Guide 23
1.2 Parameter Groups
Parameter
Group
Name Page
Parameter
Group
Name Page
A1 Initialization Parameters 24 F6 Communication Option Card 45
A2 User Parameters 25 F7 Communication Option Card 45
A3 Trace Data 25 H1 Contact Input 49
b1 Operation Mode Selection 26 H2 Contact Output 54
b2 DC Injection Braking 27 H3 Analog Input 59
b3 Speed Search 27 H4 Analog Output 61
b4 Timer Function 29 H5 MEMOBUS/Modbus Communications 62
b5 PID Control 29 L1 Motor Protection 63
b6 Dwell Function 31 L2
Momentary Power Loss Ride-Thru/Main
Power Supply
64
b7 Droop Control 31 L3 Stall Prevention 64
C1 Acceleration and Deceleration Times 32 L4 Speed Detection 65
C2 S-Curve Characteristics 32 L5 Fault Restart 66
C3 Slip Compensation 33 L6 Torque Detection 66
C4 Torque Compensation 33 L7 Torque Limit 68
C5 Automatic Speed Regulator (ASR) 34 L8 Drive Protection 68
d1 Frequency Reference 35 n1 Hunting Prevention 70
d2 Frequency Upper/Lower Limits 36 n2
Speed Feedback Detection Control (AFR)
Tuning
71
d3 Jump Frequency 36 n7
Synchronous Transfer with a Commercial
Power Supply
71
d4
Frequency Reference Hold and Up/Down 2
Function
36 n9 I/O Voltage Detection 72
d5 Torque Control 37 o1 Digital Operator Display Selection 72
d6 Field Weakening and Field Forcing 38 o2 Digital Operator Keypad Functions 73
d7 Offset Frequency 38 o3 Copy Function 74
E1 V/f Pattern for Motor 1 39 o4 Maintenance Period 74
E2 Motor 1 Parameters 39 T1 Auto-Tuning for Induction Motors 75
E3 V/f Pattern for Motor 2 40 U1 Operation Status Monitors 76
E4 Motor 2 Parameters 40 U2 Fault Trace 79
F1 PG Speed Control Card (PG-B3/PG-X3) 42 U3 Fault History 80
F2 Analog Input Card (AI-A3) 43 U4 Maintenance Monitors 80
F3 Contact Input Card (DI-A3) 43 U5 PID Monitors 82
F4 Analog Monitor Card (AO-A3) 44 U6 Control Monitors 82
F5 Contact Output Card (DO-A3) 45 U9 Power Cell Monitor 83
MV1000ParameterGuide_E_conditional.book 23 ページ ２０１３年１０月１１日 金曜日 午後８時１８分