YASKAWA CIMR-MC5A20P4, Instruction Manual, Page: 107 / 294

Basic Operation
6.1.2 Frequency Reference Settings: b1-01, H3-01, H3-08, H3-09
- 4
6.1.2 Frequency Reference Settings: b1-01, H3-01, H3-08, H3-09
These settings are required when inputting analog voltage or current signals from the control circuit termi-
nals.
J
Frequency Reference Selection: b1-01
D
Constant b1-01 is used to select the reference source.
User
Change
during Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
b1-01 Reference selection 0 to 3 -- 1 Q Q
D Settings
Setting Reference source
0 Digital Operator
1 Control circuit terminals (analog inputs)
2 Transmission
3 Optional Card
D The frequency reference is input from the control circuit terminals (external terminals), so set b1-01
to 1.
J Frequency Reference (Voltage), Terminal 13 Signal Level: H3-01
User
Change
during Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
H3-01
Signal level selection
(terminal 13)
0 1 -- 0 B B
D
The frequency reference (voltage) is valid when constant b1-01 has been set to 1.
D
Set the voltage range for the frequency reference (voltage) signal.
D
Settings
Setting Function
0 0 to 10 VDC input [11--bit + polarity (positive/negative) input]
1
--10 to 10 VDC input
(A negative voltage is a reference for reverse rotation.)
J Frequency Reference (Current), Terminal 14 Signal Level: H3-09, H3-08
D
Set terminal 14 to a frequency reference with constant H3-09 to use terminal 14 as the frequency refer-
ence terminal.
D The frequency reference setting is 1F.
Function Selection: H3-09
User
Change
during Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
H3-09
Multi-function analog
input (terminal 14)
1 to 1F -- 1F A A
D After setting constant H3-09, set terminal 14 signal level with H3-08.
Signal Level: H3-08
D
The frequency reference (current) is valid when constant b1-01 has been set to 1.
D
Set the signal level for the frequency reference (current).
User
Change
during
Setting Factory
Valid Access Levels
User
Constant
Number
Name
during
Opera-
tion
Setting
Range
Unit
Factory
Setting
Open Loop
Vector
Flux Vector
H3-08
Signal level selection
(terminal 14)
0 2 -- 2 A A
6