3.3 Self-configuration
3.3.1 Executing Self-configuration
3-10
( 2 ) Using the MPE720 (MP2100M)
1.
Click
Module Configuration
on the
My tool
window.
2.
To execute self-configuration for all modules, click
All modules
. To execute self-configuration for a
single module, first select the relevant module, and then click
specified module
.
The result depends on the command that is used, as described below.
Command
Result
Self-configuration for all
Modules
• The Module configuration definitions are updated.
• The definitions for any Modules for which definitions already exist are not changed.
• The default values are allocated in the definitions for any new Modules that are detected.
Module Self-configuration
• Definitions are allocated only for the selected Module.
• The definitions for any Modules for which definitions already exist are not changed.
• The default values are allocated in the definitions for any new Modules that are detected.
