8
9
Hotline: 1-866-902-9690
Hotline: 1-866-902-9690
WORK INTERRUPTIONS
• After the machine has been turned off, the cutting cylinder will continue to rotate for a few seconds.
Keep hands and feet well away.
• Switch off the device. Only remove blockages when the machine is standing completely still.
• Switch off the power when the machine is transported, lifted or tilted.
• Never leave the machine unattended. Children should be supervised to ensure that they do not play
with the appliance.
The following below outlines measures to avoid damage and harm to both the Robotic Mower and people
using it.
TAKING CARE OF YOUR MACHINE
• Switch off the power when the machine is to be carried across uneven surfaces, for example steps.
• Inspect the machine before each use. Never operate the machine if safety devices (e.g. impact
protector, parts of the cutting facility or bolts) are missing, worn out or damaged. Check the power
cable for damage. To avoid imbalance, all tools and bolts must be changed as complete sets.
• Only use spare parts and accessories that have been supplied or recommended by the manufacturer.
The use of alien parts results in the immediate loss of all guarantee claims.
• Ensure that all nuts, bolts and screws are firmly tightened and that the machine is in a safe working
condition.
• Never try to repair the machine yourself, unless you have been trained accordingly. All work that has not
been listed in these instructions must only be carried out by authorised servicing agencies.
• Treat the machine with the greatest care. Always keep the tool clean. Follow the maintenance
instructions.
• Never overload the machine. Always work within the specified capacity range. Do not use low-power
machines for heavy-duty work. Do not operate the machine for purposes for which it is not intended.
ELECTRICAL SAFETY
The following states how to avoid accidents and injuries due to electric shock:
• Before each use, carry out a visual inspection of the power and length and type of extension cords to
be used (not lighter than required by Clause 25.7) for any signs of damage or ageing. Damaged mains
power cables increase the risk of electric shock.
• Connect the machine to a power socket with a residualcurrent circuit breaker that has a rated current of
no more than 30 mA.
• Always keep the extension cable well away from the cutting tools. Should the power cable become
damaged during work, instantly disconnect the power cable from the mains. DO NOT TOUCH THE
POWER CABLE BEFORE IT HAS BEEN DISCONNECTED FROM THE MAINS! Risk of electric shock.
• The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
• Keep extension cable away from blades and other moving parts. They may damage the cable and result
in contact with live parts.
• Check that the mains voltage is the same as indicated on the rating plate.
MAINTENANCE AND STORAGE
• Keep all nuts, bolts and screws tight to be sure the machine is in a safe working condition.
• Replace worn or damaged parts for safety.
• Ensure that only the recommended replacement cutting blades are fitted.
• Ensure that batteries are charged using the charger supplied or recommended by the manufacturer.
Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
• Servicing of the machine should be carried out according to manufacturer's instructions.
• In the event of leakage of electrolyte, flush with water neutralising agent, seek medical help if it comes
into contact with the eyes.
• Store the appliance with battery pack fully charged at room temperature (around 68ºF).
• Every deep discharge cycle decreases the capacity of battery pack. To prolong battery life, it is
recommended to charge the battery every 6 months over extended periods of time without use.
TRANSPORT
The original packaging should be used when transporting the Robotic Mower over long distances.
To safely move from or within the working areas:
• Press the STOP button to stop the mower.
• Move the main switch button to the OFF position if you intended to carry the mower.
• Carry the Robotic Mower using the handle below at the rear. Carry the mower with the blade disc away
from the body.
PRODUCT SAFETY WARNINGS
Not to touch moving hazardous parts before these have come to a complete stop.
Do not store anything heavy on the top of the Robotic Mower or docking station both during storage or
when in use.
Never use the device if the main power switch is damaged or does not work properly. Never modify the
main power switch. Set the main power switch to OFF for storage or when the device is not in use. Use the
original packaging when transporting the Robotic Mower, especially for long distances.
If you need to carry the Robotic Mower from or within the working area, first press the STOP button to stop
the device.
Secondly, ensure that the main power switch is switched OFF before you lift up your Robotic Mower.
Thirdly, carry the Robotic Mower by the carrying handle at the rear under the mower, keeping the blade disc
away from your body as shown.
1
2
3
LIGHTNING PROTECTION
In order to prevent lightning damage to the machine, do not place the docking station under tall trees.
CAUTION
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
CAUTION
