24
25
Hotline: 1-866-902-9690
Hotline: 1-866-902-9690
Cutting height adjustment
The cutting height can be adjusted by rotating the height adjustment dial located on the top of the machine.
Cutting height range from 1-1/3“-3”.
NOTE!
We recommend using an ordinary lawn mower or trimmer to cut the lawn below 2.5 in before using
the Robotic Mower. This will ensure you get the optimum performance.
4
Start mowing
After finishing the time settings, now you can start your Robotic Mower
1. Press the
button for 4 times to unlock the panel.
2. Press the button
and
then close the lid, the Robotic Mower will start to work.
Return to the docking station
1. Press the
button for 4 times to unlock the panel.
2. Press the button
and
then close the lid, the Robotic Mower will back to the docking station.
Emergency Stop
Press STOP button to halt the mower at any time.
MAINTENANCE AND STORAGE
Maintenance work that has not been described in these instructions must be carried out by a servicing
agency authorised by the manufacturer. Only use original parts.
Maintenance
Check and clean your Robotic Mower regularly and replace worn parts if necessary. Preferably use a dry
brush, a damp cloth or a sharpened wooden piece.
Never use flushing water.
Following these maintenance instructions can extend your Robotic Mower's service life.
Battery Life
The Robotic Mower has a maintenance free Li-ion battery, with an estimated life of more than 2 years
(depending on treatment and usage).
Winter Storage
During winter, keep your mower, docking station and power supply in a dry place.
We recommend a shed, garage or preferably store it indoors.
Prepare your device for winter storage as follows:
1. Fully recharge the battery.
2. Set the mains power switch to "OFF".
3. Thoroughly clean your Robotic Mower.
4. Unplug the power supply from the mains outlet.
5. Disconnect the power supply from the docking station.
6. Disconnect the boundary wire from the docking station. Lift up the docking station and clean.
The boundary wire can remain outside. However, it is imperative to protect the wire against corrosion.
We recommend a water-free grease or suitable sealing tape.
If available, repack the product in the original packaging.
Alternatively, our service centre offers a winter service for your device. This will include a check-up of all
parts and - if available - a software upgrade.
Preparing for spring
After winter storage, please clean the charging contacts on both the Robotic Mower and the docking
station.
Use a fine abrasion paper or a brass brush; this will help to achieve the best charging efficiency and avoid
any charging interference.
Cleaning the mower body
As your Robotic Mower is battery powered you need take care when cleaning. Remove rough dirt with a
soft brush. Use a manual water spray with mild household detergent for intensive cleaning.
Wipe off any residue after cleaning with a moist rag.
Disposal
To help the environment, please dispose of the product properly when it has reached the end of its useful
life and not in the household waste. Information on collection points and their opening hours can be
obtained from your local authority.
Li-Ion environmental damage through incorrect disposal of the batteries / rechargeable batteries.
Remove the battery pack from the product before disposal. Batteries /rechargeable batteries may not
be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to
hazardous waste treatment rules and regulations. Please dispose of batteries according to the relevant local
requirements.
Replacing the battery
While the actual battery life will depend on usage and environmental factors, the typical service life is
several years. Spare batteries are available from customer support. To replace the battery, please follow the
instructions below.
OPERATION