Yard force Revola X4E, Operator'S Manual, Page: 11 / 16

20 21
Hotline: 1-866-902-9690 Hotline: 1-866-902-9690
OPERATION
Control panel
Initial interface
when power on your robotic mower, after entering the defult PIN 0000, you will see the initial interface on
the display.
Enter PIN Code
* * * *
Four times
S1 2021-03-15 12:52 68%
Standby
Sat
Fri Thu Wed Tue Mon Sun
T2: 14:00 - 16:00
T1: 08:00 - 10:00
。
*NOTE: Inverted color means date was selected.
Mon
Mon
Before starting your robotic mower
Please follow below steps to adjust the time setting before starting your robotic mower.
1. Press the button to enter the menu setting.
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
2. Press the button or use the navigation key + OK button to enter System date and time setting
System date and time
2021-03-15 12:52
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
3. Press the button or use the navigation key + OK button to enter Working day and time setting
Working day and time setting
1. Set working day
2. Set working time Set working day
Sun Sat Fri Thu Wed Tue Mon
1 2 3 4 5 6 7
Set working Time
1 2 3 4 5 6
7
T1 08:00-11:00
T2 16:00-18:00
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
Sun Sat Fri Thu Wed Tue Mon
NOTE: If the working day is activated, then the blinking cursor will move to specified time setting
4. Press the button or use the navigation key + OK button to enter Pin code reset
Enter old pin code
* * * *
Enter new pin code
* * * *
Enter repeat new pin code
* * * *
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting
5. Press the button or use the navigation key + OK button to enter sensor setting
Wireless setting
SETTING FUNCTION
1. System date and time
2. Working date and time
3. Pin code reset
4. Wireless setting
5. Sensor setting
6. Language setting
7. Other setting WIFI configure
1. WIFI configure
2. Connection status
3. Direct mode
Enter WIFI confiuration proces
Please complete the setting with
your mobile phone
Connection Status
Connected to server
Device MAC: XXXXXXXXXXXX
OPERATION
Boundary signal status
Battery pack
remaining capicity
*Robotic mower
working date
Current mower
status
*Robotic mower
working time
Robotic mower system date and time
WIFI / AP connection status