![background image](http://html1.mh-extra.com/html/yard-force/lm-c38/lm-c38_original-instructions-manual_3197001029.webp)
22
23
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. Soft grip
2. Upper handle frame
3. Middle handle bars
4. Lower handle frame
5. Ejector flap
6. Grass collection bag
7. Wheel
8. Battery compartment cover
9. Safety key
10. Cable clip
11. Upper handle knob
12. Safety lock button
13. Height adjustment knobs
14. Roller bar
15. Cylinder blade
Delivery contents (Fig. B)
Carefully unpack the appliance and check that it is complete. Dispose of the packaging
material correctly.
a. Roller mower
b. Lower handle frame
c. Middle handle bars
d. Upper handle knob
e. Battery pack
f. Charger
g. Manual
h. Allen key
i. cable clip
j. bolt
WARNING:
If any parts are damaged or missing, do not operate this tool until these
parts are replaced. Failure to heed this warning could result in serious personal
injury.
NOTE:
Always recycle the packaging in accordance with local recycling guidelines.
ASSEMBLY
WARNING:
Do not insert the battery and the safety key until assembly is complete. Failure to
comply could result in accidental starting and serious personal injury.
WARNING:
Before performing any maintenance, make sure the battery and the safety key are
removed from the unit. Failure to heed this warning could result in serious personal injury.
WARNING!
The product must be fully assembled before operation. Do not use a product that
is only partially assembled or assembled with damaged parts.
NOTE:
Before using the reel mower, follow these instructions to assemble the appliance.
Handle Assembly
1. Insert the ends of the lower handle frame into the sockets on both side of the mower
base. Lock with the lower handle knobs provided. (Fig. C)
2. Fit the middle handle bars on both sides of the lower handle frame, aligning the holes.
Secure with two sets of handle knobs and bolts. (Fig. D)
NOTE:
Each middle handle bar has 2 holes on the top and the bottom. Adjust the
handle assembly to the optimal position by aligning with the hole at the desired height.
3. Fit the upper handle frame on both the middle handle bars, as shown, aligning the holes.
Secure with the remaining two sets of handle knob and bolt. (Fig. E)
4. Secure the cable with the two cable clips, as shown. (Fig. F)
Grass Collection Bag As Fitting
The grass collecting bag prevents grass clippings being thrown across your
lawn as you mow.
1. Fit the grass collection bag support rod into the tube of the grass collection bag. (Fig. G)
2. Clip the protective leather profiles onto the support rod to secure the assembly (Fig. H).
3. Lift the ejector flap to the highest position, and assemble the grass collection bag onto
the mower by hooking the sockets to both ends of the roller bar shaft. (Fig. I)
4. Hook the strap hook of the grass collection bag on the center bar on the lower handle
frame. Adjust the strap to an appropriate height so that the grass collection bag does
not rub against the ground while mowing or transporting the unit. (Fig. J)
5. The mower can be used without the grass collection bag. When the grass collection
bag is not attached, adjust the ejector flap to a suitable position to shied flying grass
clippings.
Summary of Contents for LM C38
