19
4-5. Installing tilling blade
WARNING
- When installing or replacing tilling blades, put the tractor on a level and hard surface place, apply the
parking brake and put chocks. If not, it may cause an injury accident.
- When installing or replacing tilling blades, be sure close hydraulic stop valve fully to prevent from the
rotary falling down. In addition to the hydraulic stop valve, put a support under the tilling blade shaft or
skids for sure. If not, the rotary may fall down and may cause an injury.
Tilling blade installing
(figure from the back side view)
[1] Right tilling blade:
RH170/24 blades, RH190/27 blades
[2] Left tilling blade:
RH170/24 blades, RH190/27 blades
[3] Flange
[4] Bolt M12x35, fine thread
[5] Nut M12, fine thread
[6] Spring washer M12
(L) Rotary left side
(R) Rotary right side
Blade and bolt fixing
(figure from the back side view)
[1] Right tilling blade
[2] Left tilling blade
[3] Flange [4] bolt [5] Nut [6] Washer Bolt tightening torque: 98-128 N-m (10-13 kg-m)
https://tractormanualz.com/
