17
IMPORTANT
- Check the lock pin is placed in the groove of
the PTO shaft and the rotary pinion shaft.
When the pin is placed in the groove, the pin
will return back.
4-3-2. Detaching the rotary
WARNING
- Be sure to stop the engine whenever removing or installing the PTO drive shaft[a]. It may cause an injury.
1. Put the tractor on a flat and hard place.
2. Set right and left skids [b] to the lowest position.
3. Lower the rotary till skids are on the ground.
4. Stop the engine.
[b] Skid (right and left)
5. Remove the drive shaft.
Push the lock pin and pull the drive shaft. Remove
the rotary side first.
6. Pull out the pin of a top link and remove the top link.
7. Remove the right side lower link.
8. Remove the left side lower link.
https://tractormanualz.com/
