26
7-4. Replacing bearing case R oil
<Oil replace>
Remove the protector R [A] of the bearing case R.
Remove and wipe off oil.
Reinstall the protector R [A].
Remove the plug [1] and put specified amount of oil.
Oil: Gear oil SAE #90
Amount: 0.1 Liter
Replace: Every 300 hours
IMPORTANT
It is difficult to check oil level of the bearing case R.
Be sure to replace oil periodically, every 300 hours.
If old oil is milky, O-ring of the protector or oil seal of
rotary shaft may be damaged. Replace the
damaged one immediately.
[A] protector R
[1] Plug
7-5. Grease and oil
Grease to the grease nipple or apply grease to the
moving parts after every day work. If worked in
the field with water, be sure to grease to the
grease nipple to push out muddy water.
[A] Apply grease to moving part
<PTO drive shaft>
- Separate the shaft and apply grease on sliding part.
- Apply grease to PTO shaft and rotary pinion shaft.
- Apply grease on lock pin and universal joint moving
parts.
IMPORTANT
-
If worked in the field with water, be sure to apply
grease to remove dirty grease or it may cause
rusting.
https://tractormanualz.com/
