Yanmar RH170 Operator'S Manual Download Page 4

Page: 4 / 32

Symbols used

DANGER

"DANGER" indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING

"WARNING" indicates a potentially hazardous situation

which, if not avoided, could result in death or serious

injury.

CAUTION

"CAUTION" indicates a potentially hazardous situation

which, if not avoided, could result in minor or moderate

injury.

IMPORTANT

This [IMPORTANT] symbol indicates important proper

operation or service messages in this manual. When

you see this symbol, carefully read the messages that

follow.

[NOTE]

“NOTE” describe precautions to take while working.

The using purpose of the rotary

Use this rotary for tilling and/or cultivating farm land by attaching to an agricultural

tractor.

Never work for a purpose other than agricultural works and never modify by yourself.

Keep in mind that it would not be covered by the warranty in case that the rotary is

modified without the approval of YANMAR.

Applicable tractor

Rotary Model

Tractor Model

RH170

EF393T

RH190

EF494T

https://tractormanualz.com/

Summary of Contents for RH170

































Search results

Summary of Contents for RH170

Reviews:

Related manuals for RH170

Brands by name

Popular brands

Yanmar RH170, Operator'S Manual

Search results

Summary of Contents for RH170

Reviews:

Related manuals for RH170

Brands by name

Popular brands