manualshive.com logo in svg

Yamato WG 1000, Instruction Manual

Share
Download
Yamato WG 1000 Instruction Manual Download Page 42

 

 

39

 

Long storage and disposal 

When not using this unit for long term / When disposing 

 

 

•

  If this unit is to be put out of service for a long time, be sure to turn of the earth leakage 

breaker of this unit for safety, and close the tap.    Water in the boiler and distilled water tank, if 
stored as it is, will deteriorate in quality due to generated bacteria or algae.    Drain water by 
the procedure below: 

Boiler Water Drain 

1.  In draining boiler water, turn off the earth 

leakage breaker, ensure that the tap is 
closed, then wait for 30 minutes or more, 
and open the front door. 

2.  Open the boiler water drain cock. 
3.  Make sure that all water in the boiler and 

float cylinder is drained. 

4. Be sure to close the boiler water drain 

cock. If boiler water drain cock is opened 
in next use, water is not fed into the boiler, 
and distillation is not started. 

 

 

Boiler Water 
Drain Cock

Open 

Close 

Summary of Contents for WG 1000

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands