Yamato WG 1000 Instruction Manual Download Page 23

Page: 23 / 56

Description and Function of Each Part

Control Panel

FILL

CONDUCTIVITY

WATER

LEVEL

MEASURED
CONTINUOUS

FULL

EMPTY

POWER

PURE

WATER

DISTILLED

WATER

①

POWER key

Turns on/off the power of the controller.

②

Message indication area

Indicates the measured value and setting value.

③

WATER LEVEL lamp

Indicates water level in the distilled water tank in five levels.

④

DITILLED WATER key

Starts/stops drawing distilled water.

⑤

▲▼

key

Selects the value setting item.

⑥

PURE WATER key

Starts/stops drawing pure water.

⑦

FILL key

Switches water collecting method. (Measured filling/Continuous filling)

⑧

FILL lamp

Lights up when either of MEASURED or CONTINUOUS is selected.

⑨

CONDUCTIVITY key

Switches conductivity indication unit.

（

S/m

Ω

･

）

⑩

M key

Used when entering submenu or maintenance mode.
Also (confirms the setting) then shifts to the next setting item.

⑪

F key

(Cancels the setting) then returns to the previous setting item.

Description of

③

WATER LEVEL lamp

This lamp indicates the storage amount of distilled water in the tank in five levels. When this red lamp lights,
distilled water cannot be collected for empty drive prevention of the pump.

When this red lamp lights, distilled

water cannot be collected for empty drive prevention of the pump.

When water keeps being stored, and a

red lamp in the lower is blinked, distilled water can be gathered.

In addition, a red lamp in the lower is

turned off when the amount of storing water increases, a green lamp since the second step lamp, and the
amount of storing water can be confirmed.

FULL

EMPTY

Lighting

FULL

EMPTY

FULL

EMPTY

FULL

EMPTY

FULL

EMPTY

FULL

EMPTY

Sampling pump operational range

＜

EMPTY

＞

＜

FULL

＞

Lighting

Blinking

①

②

③

⑤

④

⑦

⑧

⑨

⑩

⑪

⑥

Summary of Contents for WG 1000

























































Search results

Summary of Contents for WG 1000

Reviews:

Brands by name

Popular brands

Yamato WG 1000, Instruction Manual

Search results

Summary of Contents for WG 1000

Reviews:

Brands by name

Popular brands