25
Operation Method
Collection of Measured Amount of Distilled Water
1. Switching water collection method
FILL
CONDUCTIVITY
M
F
WATER
LEVEL
MEASURED
CONTINUOUS
FULL
EMPTY
POWER
PURE
WATER
DISTILLED
WATER
In Distillation
DW-Conductivity
0.85×10
-4
S/m
Measured: 0.1L
Switch to “MEASURED” amount water collection
method.
Switch from “CONTINUOUS” to “MEASURED” by
pressing FILL key.
2. Amount of collecting water setting
FILL
CONDUCTIVITY
M
F
WATER
LEVEL
MEASURED
CONTINUOUS
FULL
EMPTY
POWER
PURE
WATER
DISTILLED
WATER
In Distillation
DW-Conductivity
0.85×10
-4
S/m
Measured: 20.0L
Set the amount of collecting distilled water. The same
setting screen is used for setting of pure water and
distilled water.
1. Set the amount of distilled water by pressing
▲▼
key.
Set up to 30 liters for WG250, or up to 100 liters for
WG1000.
2. After setting, pressing DISTILLED WATER key
starts water collection.
3. Collecting
FILL
CONDUCTIVITY
M
F
WATER
LEVEL
MEASURED
CONTINUOUS
FULL
EMPTY
POWER
PURE
WATER
DISTILLED
WATER
DW sampling
DW-Conductivity
0.85×10
-4
S/m
Measured: 18.2L
Water collection of measured amount starts.
1. The counter starts decrementing from the setting
value.
2. When collecting water is finished, message
"Measured: 0.0L" appears on the window.
3. Go back to clause 2.
If pressing DISTILLED WATER key while collecting
water, the operation stops and the setting value is
reset.
②
①
