
24
6. Maintenance Method
Daily Inspection and Maintenance
Warning
●
Disconnect the power cable from the power source when doing an inspection or maintenance
unless needed.
●
Perform the daily inspection and maintenance after returning the temperature of this unit to the
normal one.
●
Do not disassemble this unit.
Caution
●
Use a well-drained soft cloth to wipe dirt on this unit. Do not
use benzene, thinner or cleanser for wiping. Do not scrub
this unit. Deformation, deterioration or color change may
result in.
ベンジン
シンナー
クレンザー
Cleaning After Using
(1) After completing the operation, remove the attachments following the process “Preparations" on
P.11 in reverse order.
(2) Clean the portion of attachment to which the powder is adhered.
(3) Flow the distilled water into the sample tube by pressing the pump switch, and remove the
contaminant attached to the inner of the part.
(4) Remove the spray air tube and sample tube from the spray nozzle, and disassemble the nozzle
as shown in the Photo 1. After disassembling, clean it using the supersonic cleaner. Remaining
the contaminant to the inner of the part may cause the insufficient spray. Therefore, clean it
completely.
Spray nozzle exploded drawing