10
3. Names of parts and their function
Operation Panel
OFF
ON
POWER
ATOMIZING AIR
3
m /min
DRYING AIR
BLOWER
PUMP
KEY PANEL
OUTLET TEMP
INLET TEMP
No. Name
Operation/Action
①
Push button switch
For switching on or switching off the power
②
Connector of outlet temperature
sensor
For connecting the temperature sensor
③
Blower adjust plate
For setting the cycle wind volume
④
Adjust plate for solvent delivery
speed
For adjusting the flow of solvent delivery pump.
⑤
Operation Key Panel
(Touch Panel)
For the following operation and display.
HEAD UP/DOWN, Blower ON/OFF, Heater ON/OFF,
Solvent delivery pump FWD/REV, NOZZLE BLOW and
NEEDLE KNOCKER,
When abnormality occurs on the inlet and outlet
temperature, ERROR displays.
⑥
Display Outlet Temperature
Display the outlet temperature, to prevent over lifting.
⑦
Setting and displaying inlet
temperature
For setting inlet temperature, display measured temperature
to prevent over lifting.
⑧
Flow meter
Display the flow of drying air.
⑨
Adjust plate of needle valve
For adjusting the pressure of compressed air.
⑩
Pressure gauge
Display the pressure of compressed air.
①
②
⑩
⑦
⑥
③
⑧
⑤
⑨
④