Yamaha YZ450FP 2023, Owner'S Service Manual

Page: 160 / 388

HANDLEBAR
4-44
TIP
Apply the lithium-soap-based grease on the
throttle grip sliding surface.
11.Install:
•
Throttle cable “1”
TIP
Slightly coat the end of throttle cable and inside
of throttle grip with lithium-soap-based grease.
Then, mount the throttle grip onto the handlebar.
12.Install:
• Throttle cable housing “1”
•
Screw (throttle cable housing) “2”
WARNING
EWA19310
After tightening the throttle cable housing
screws, check that the throttle grip “3”
moves smoothly. If it does not, retighten the
screws for adjustment.
13.Install:
• Rubber cover “1”
•
Cover (throttle cable housings) “2”
14.Install:
• Start switch “1”
• Front brake master cylinder assembly “2”
• Front brake master cylinder holder “3”
•
Front brake master cylinder holder bolt “4”
•
Clamp “5”
TIP
•
Install the front brake master cylinder holder
with the “UP” mark facing up.
•
Install in order for the top of the front brake
master cylinder assembly to be level.
•
First, tighten the upper bolt, then the lower bolt.
• Pass the start switch lead through the middle of
the front brake master cylinder holder.
Screw (throttle cable housing)
3.8 N·m (0.38 kgf·m, 2.8 lb·ft)
1
2
T
R
.
.
Front brake master cylinder hold-
er bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
T
R
.
.