Yamaha YZ450FP 2023, Owner'S Service Manual

Page: 94 / 388

ENGINE
3-16
clutch lever free play is obtained.
TIP
If the clutch lever free play cannot be obtained
on the handlebar side, use the adjuster on the
clutch cable side.
Clutch cable side
a. Slide the clutch cable cover.
b. Loosen the locknut “1”.
c. Turn the adjuster “2” until the specified
clutch lever free play is obtained.
d. Tighten the locknut “1”.
e. Return the clutch cable cover to its original
position.
EAM30370
ADJUSTING THE CLUTCH LEVER POSITION
1. Adjust:
• Clutch lever position “a”
Loosen the locknut “1” and use the adjuster
“2” to adjust the clutch lever position “a” as
desired.
2. Tighten:
• Locknut
EAM30219
CLEANING THE AIR FILTER ELEMENT
1. Remove:
• Sub-seat
Refer to “FUEL TANK CAP” on page 1-23.
• Air filter case cover “1”
TIP
To remove the air filter case cover:
• Raise the air filter case cover rear side while
pushing the side “a” of the air intake duct from
inside to unhook the ribs “b” on both sides of
the air filter case cover from the air filter case
“2”.
•
Slide the air filter case cover to the rear of the
vehicle to remove the projection “c” from the
hole “d” in the air filter case.
Clutch cable locknut
4.3 N·m (0.43 kgf·m, 3.2 lb·ft)
1
T
R
.
.
1
2
1
2
a
Locknut (clutch lever position)
4.8 N·m (0.48 kgf·m, 3.5 lb·ft)
T
R
.
.
1
a a a
a a
1
2 2 2
b
c
d