Yamaha YZ450FP 2023, Owner'S Service Manual

Page: 34 / 388

INSTRUMENT AND CONTROL FUNCTIONS
1-22
5. After starting off, the launch control system
will turn off automatically when the gear is
shifted into the 3rd gear.
The launch control system will also turn off
when the engine is stopped or the gear is
shifted into the 3rd gear or higher.
TIP
•
When the launch control system is turned off,
the indicator light “2” will stop flashing.
•
Indicator light on the handlebar switch (left)
flashes orange

Check or replace any faulty
electrical part(s).
Refer to “CHECKING THE INDICATOR
LIGHT” on page 8-56.
EAM30637
LAP TIME RECORD MODE
Lap time records can be measured by activating
from the Power Tuner app.
Push the mode switch “1” to start or stop mea-
suring.
TIP
• The indicator light “2” flashes blue while the lap
time record mode is on.
•
Drive mode cannot be changed while in lap
time record mode.
•
Measurement results can be received and
saved on the app.
EAM30627
DRIVE MODE
Push the mode switch “1” to change between
drive mode 1 and drive mode 2.
TIP
Indicator light on the handlebar switch (left)
flashes orange

Check or replace any faulty
electrical part(s).
Refer to “CHECKING THE INDICATOR LIGHT”
on page 8-56.
To change the drive mode
1. Shift to neutral.
2. Start the engine.
3. Push the mode switch “1”.
TIP
As shipped from the factory, drive modes 1 and
2 are the same. You must use the Power Tuner
app to adjust the map settings.
When the indicator light “2” illuminates blue,
drive mode 2 is selected.
A. Drive mode 1
B. Drive mode 2
1. Push the mode switch
2. Purple
3. Blue
4. 1 second (1 flash/second)
2 2 3
1
4 4
2
1
2
1
1
2