– 34 –
OPERATION
CLEARING SNOW
WARNING
9
Do not point the discharge chute to-
ward people, buildings or cars.
9
If any foreign objects have become
lodged in the impeller, auger, or track,
stop the engine immediately and re-
move them.
Check the Snowblower for damage.
If any damage is found, repair the
Snowblower completely before using
it again.
1. Adjust the auger to the appropriate
height by using the auger housing
height control lever (see page 18).
2. Adjust the direction to blow the snow by
using the chute direction control lever.
1
2
3
4
5
1. Chute direction control lever
2. Right
3. Left
4. Clockwise
5. Counterclockwise
3. Adjust the snow blowing distance by us-
ing the chute deflector control lever.
1
2
3
4
5
1. Chute deflector control lever
2. Pull
3. Push
4. Upward
5. Downward
4. Hold the auger clutch lever. The auger
starts rotating.
WARNING
After first ensuring the snow blowing
direction is safe, then hold the auger
clutch lever.
1
1. Auger clutch lever
5. Make sure that the shift lever is in the “N”
(Neutral) position, and hold the drive
clutch lever.
NOTICE
9
Move the shift lever to the “N” (Neu-
7T0-28199-70-E0.indd 34
2019/05/01 9:22:58
