Yamaha YT624 Owner'S Manual Download Page 63

Page: 63 / 76

– 58 –

PERIODIC MAINTENANCE

sary to inspect the fluid level or refill

with water.

Use a battery charger specially de-

signed for hermetically sealed batter-
ies when charging. Consult a Yamaha
dealer for details.

Charge the battery every three

months if not using for an extended
period.

Be sure to replace the battery with

the same type.

Removing the battery

WARNING

Position the Snowblower on a level sur-
face.

1. Stop the engine and remove the engine

switch key.

2. Remove the screws 1. Then, remove

the screws 2 and collars, and the right
side cover.

1.  Screw 1
2.  Screw 2
3. Collar
4.  Right side cover

3. Remove the battery band.
4. First disconnect the battery negative

lead from the negative battery terminal,
and then disconnect the battery positive
lead from the positive battery terminal.

1.  Battery band
2.  Negative lead
3.  Positive lead

5. Remove the battery.

Installing the battery

Install the battery by performing the remov-
al procedures in the reverse order.

Cleaning the terminals

If there is any contamination or corrosion
on the battery terminals clean them using a
soft brush. If there is any white powder ad-
hering to the battery, sprinkle warm water
on the battery and wipe off the powder.

1. Battery terminal

Charging the battery

Have a Yamaha dealer charge the battery
as soon as possible if it seems to have dis-
charged.

7T0-28199-70-E0.indd 58

2019/05/01 9:23:03

Summary of Contents for YT624













































































Search results

Summary of Contents for YT624

Reviews:

Related manuals for YT624

Brands by name

Popular brands

Yamaha YT624, Owner'S Manual

Search results

Summary of Contents for YT624

Reviews:

Related manuals for YT624

Brands by name

Popular brands