Yamaha YT624 Owner'S Manual Download Page 30

Page: 30 / 76

– 25 –

PRE-OPERATION CHECK

CHECKING THE ENGINE OIL

Remove the engine oil filler cap, and make

sure the engine oil is at the correct engine
oil level.

1. Position the Snowblower on a level sur-

face.

2. Pull out the lower part of the engine oil

inspection cover while pressing up the
tab of the cover. Then, pull the engine
oil inspection cover downwards to re-
move it.

1. Engine oil inspection cover
2. Tab

Remove the engine oil filler cap.

1. Engine oil filler cap

4. Make sure that the engine oil is at the

correct engine oil level.

1. Correct engine oil level

5. If the engine oil is below the correct en-

gine oil level, fill up to the brim of the oil
filler hole with the recommended engine

oil.

Recommended brand:

YAMALUBE

Type:

SAE 5W-30

Recommended engine oil grade:

API Service SE type or higher

Engine oil quantity:

0.6 L (0.63 US qt, 0.53 Imp qt)

TIP

If the engine oil spills, wipe it up immedi-
ately using dry rags.

6. Install and tighten the engine oil filler

cap securely.

7. Install the engine oil inspection cover.

7T0-28199-70-E0.indd 25

2019/05/01 9:22:57

Summary of Contents for YT624













































































Search results

Summary of Contents for YT624

Reviews:

Related manuals for YT624

Brands by name

Popular brands

Yamaha YT624, Owner'S Manual

Search results

Summary of Contents for YT624

Reviews:

Related manuals for YT624

Brands by name

Popular brands