Perio
d
ic maintenance an
d
a
d
justment
7-12
7
TIP
Skip steps 4–7 if the oil filter element is
not being replaced.
4. Remove the outer and inner oil fil-
ter element covers by removing
the bolts.
5. Remove the oil filter element and
O-ring.
6. Install a new oil filter element and
O-ring.
TIP
Make sure that the O-ring is properly
seated.
7. Install the oil filter element covers
by installing the bolts, and then
tighten them to the specified
torque.
8. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
9. Refill with the specified amount of
the recommended oil, and then in-
stall and tighten the oil filler cap.
1. Outer oil filter element cover
2. Bolt
1. Inner oil filter element cover
2. Bolt
1. Oil filter element
2. O-ring
Ti
g
htenin
g
torque:
Oil filter element cover bolt:
10 N·m (1.0 kgf·m, 7.2 lb·ft)
Ti
g
htenin
g
torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 31 lb·ft)
U1BF27E0.book Page 12 Tuesday, May 17, 2016 8:35 AM
