Perio
d
ic maintenance an
d
a
d
justment
7-36
7
TIP
Make sure that there is enough space
between the brake pads before insert-
ing the brake disc and that the slot in
the speedometer gear unit fits over the
retainer on the fork leg.
3. Insert the wheel axle.
4. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
5. Tighten the wheel axle to the
specified torque.
6. Tighten the front wheel axle pinch
bolt to the specified torque.
7. While applying the front brake,
push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.
8. Connect the speedometer cable.
EAU25081
Rear wheel
EAU56630
To remove the rear wheel
WARNING
EWA10822
To avoi
d
injury, securely support the
vehicle so there is no
d
an
g
er of it
fallin
g
over.
1. Loosen the axle nut.
2. Disconnect the brake torque rod
from the brake shoe plate by re-
moving the bolt and nut.
3. Loosen the brake torque rod nut at
the swingarm.
1. Speedometer gear unit
2. Speedometer cable
3. Retainer
Ti
g
htenin
g
torque:
Wheel axle:
59 N·m (5.9 kgf·m, 43 lb·ft)
Ti
g
htenin
g
torque:
Front wheel axle pinch bolt:
20 N·m (2.0 kgf·m, 14 lb·ft)
1. Axle nut
U1BF27E0.book Page 36 Tuesday, May 17, 2016 8:35 AM
