Perio
d
ic maintenance an
d
a
d
justment
7-32
7
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAU64010
Replacin
g
the hea
d
li
g
ht
b
ul
b
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
ECA10661
Do not touch the
g
lass part of the
hea
d
li
g
ht
b
ul
b
to keep it free from
oil, otherwise the transparency of
the
g
lass, the luminosity of the
b
ul
b
,
an
d
the
b
ul
b
life will
b
e a
d
versely af-
fecte
d
. Thorou
g
hly clean off any
d
irt
an
d
fin
g
erprints on the hea
d
li
g
ht
b
ul
b
usin
g
a cloth moistene
d
with al-
cohol or thinner.
1. Remove the headlight unit by re-
moving the screws.
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
Specifie
d
fuses:
Main fuse:
30.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Carburetor warmer fuse:
15.0 A
Backup fuse:
10.0 A (XVS650AH)
Parking lighting fuse:
10.0 A (XVS650AH)
1. Do not touch the glass part of the bulb.
1. Screw
1. Headlight coupler
2. Headlight bulb cover
U1BF27E0.book Page 32 Tuesday, May 17, 2016 8:35 AM