Perio
d
ic maintenance an
d
a
d
justment
7-34
7
EAU70580
Replacin
g
a turn si
g
nal li
g
ht
b
ul
b
or the
b
rake/tail li
g
ht
b
ul
b
1. Remove the lens by removing the
screws.
XVS650H
XVS650AH
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
NOTICE:
Do not over-
ti
g
hten the screws, otherwise
the lens may
b
reak.
[ECA10682]
EAU24351
Supportin
g
the motorcycle
Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other mainte-
nance requiring the motorcycle to
stand upright. Check that the motorcy-
cle is in a stable and level position be-
fore starting any maintenance. A
strong wooden box can be placed un-
der the engine for added stability.
To service the front wheel
1. Stabilize the rear of the motorcy-
cle by using a motorcycle stand
or, if an additional motorcycle
stand is not available, by placing a
jack under the frame in front of the
rear wheel.
2. Raise the front wheel off the
ground by using a motorcycle
stand.
To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing
1. Screw
1. Screw
1. Screw
U1BF27E0.book Page 34 Tuesday, May 17, 2016 8:35 AM
